缩小字体

1.Ferrochrome Lignosulfonate (FCLS)(Patent Number:ZL 2009 1 0311639.0)

FCLS is a specially prepared thinner and fluid loss control agent used in drilling fluids. It has the characteristics of anti-high temperature and anti-salt etc. The products have been already reached SY/T5702-95 quality standard.

2.Specifications of Chrome Lignosulfonate(Patent Number:ZL 2010 1 0300947.6)

Chrome Lignosulfonate is one special kind of Lignosulfonate that used as drilling mud thinner. It can anti-high temperature, anti-salt and also can easily used with other mixture together. It is mainly suitable to drilling deep well on the condition of complex terrain and mineral content。

3.Specifications of MH-ⅠChrome free Lignosulfonate(Patent Number:ZL 2009 1 0072632.8)

MH-ⅠChrome free lignosulfonate is a thinner used in drilling fluids and fluid loss control agent. It has the character of anti-high temperature no-poisonous and anti-electrolytes and being used with other admixture agent etc. It is mainly suitable to the all kinds of muds.

4.Specifications of Calcium lignosulfonate

Calcium lignosulfonate (CALS) is a processed anionic surface agent with performance satisfactorily, it takes the by-product of second sulphate papermaking as raw materical. It has been used widely at construction 、ceramics and metallurgy etc.The CALS has advantages of a little volume to admixture, cheap price, used easily and improving the performance of concrete etc.

5.Specification of Sodium Lignosulfonate

Sodium lignosulfonate (SLS) is a processed anionic surface agent with performance satisfactorily, it takes the by-product of second sulphate papermaking as raw materical. It has powerful dispersive action and damping action. It has been used widely construction 、ceramics and agricultural chemical etc.

Pre 1 2 3 Next

Specification of Sodium Lignosulfonate

Sodium lignosulfonate (SLS) is a processed anionic surface agent with performance satisfactorily, it takes the by-product of second sulphate papermaking as raw materical. It has powerful dispersive action and damping action. It has been used widely construction 、ceramics and agricultural chemical etc.

  1. Technical Index and performance

Technical Index

Item

Requirement

Moisture(%)

≤8.0

PH

9.0~11.0

Materical insolution to water(%)

≤2.5

Reduced materical(%)

≤12.0

Calcium sulfate(%)

≤3.0

Rate of  water-reducing

≥8.0

  1. Suitable Limits

A、SLS is fit to cast-in-place and commercial product of concrete, as well as prestressed, pumping antipermcation, anti-frozing. Little collapse losses and big mould plate and synovimuming engineer.
B、SLS can be used single, combined with other admixture too, it can be made into many kinds of performance satisfactorily admixture.
C、SLS is a kind of  cohereing agent and strengthening agent in the trade of metallurgy  and ceramics.

  1. Use Direction and Notice

A、The volume supposed is 0.20~0.30%(total cement), Or according different strains brand requirement of engineer to decide proper volume after test.
B、SLS is made into solution, also direct using but extend time to benefit for mixture .
C、Be used in petrodeum、metallurgy and ceramics, SLS must be decide the volume of admixture after test.
4、Packing storage and transport
A、SLS is 25KG net weight a bag, with PE film bag inside and braid bag outside.
B、Keep it where draft and dry from wet and rain. If not take care of it will curdled then must be made into solution to use .

C、SLS is not burning、implosive or non –corrosiveness.

 
 

Picture of the product

  • Chrome Lignosulfonate      
    Chrome Lignosulfonate
  • Ferrochrome Lignosulfonate
    Ferrochrome Lignosulfonate
  • Chrome free Lignosulfonate
    Chrome free Lignosulfonate
  • Chrome Lignosulfonate      
    Chrome Lignosulfonate